Rheem Water Heater Pilot Wont Stay Lit. Have you tried cleaning/replacing your thermocouple and still no dice? As a result, the pilot doesn’t get enough fuel to stay lit.
Water Heater Pilot Light Wont Stay Lit Rheem Aquamax Dux Valcan from www.veekenplumbing.com.au
If the water heater pilot light won’t stay lit, various reasons can lie behind it. You can easily verify whether it’s malfunctioning or not. All you need is a needle to slide into the.
Push Down The Red Button To The Left Of The Gas Knob.
Have you tried cleaning/replacing the pilot assembly and still nothing? If the water heater pilot stays lit after several trials, you need to contact a professional technician to help solve the problem. The pipes are not frozen.
If The Water Heater Pilot Light Won’t Stay Lit, Various Reasons Can Lie Behind It.
The reason why your water heater keeps turning off. In general, the instructions go like this: I get a spark and the flame comes on while i'm pressing the pilot button for 1 minute straight but as soon as i depress the pilot button the flame turns off.
It Was Working Perfectly Fine Then.
A healthy thermocouple should give a reading between 650 to 850 millivolts. Dirt and grime can build up and block the flow of gas. This usually happens when the tube is kinked at one or many points.
Just Use A Multimeter And Set It To Ohm Scale.
It could also be caused by a faulty gas control valve or tripped thermal switch. Put the flame from the match to the rod where the gas will come out. Turn the water heater’s knob to pilot or light.
Take A Photo Of The Wires And Use A Screwdriver To Disconnect Them.
Light your match or you can use a lighter. Thankfully, a dirty pilot tube is the easiest issue to fix. The most common issues are thermocouple, lack of combustible air, thermostatic control or gas valve, pilot tube, flex tube, etc.
Location:
Share :
Post a Comment
for "Rheem Water Heater Pilot Wont Stay Lit"
Post a Comment for "Rheem Water Heater Pilot Wont Stay Lit"